BVBXL - J-2088 ISOCYANATE PART B
- MSDS: BVBXL
- Manufacturer: CASTALL INC EAST WEYMOUTH INDUSTRIAL PARK
- Product Name: J-2088 ISOCYANATE PART B
- National Stock Number: 8010-00N047866
Product Identification
Product ID:J-2088 ISOCYANATE PART B
MSDS Date:04/30/1986
FSC:8010
NIIN:00N047866
Kit Part:Y
MSDS Number: BVBXL
Responsible Party
EAST WEYMOUTH, MA 02189-1699
US
Emergency Phone: 617-337-6075
Info Phone: 617-337-6075
Cage: 29966
Contractor
Telephone: 617-337-6075
Cage: 29966
Ingredients
SWELL/BLISTERING & IN SOME INDIVIDUALS SKIN SENSIT
RTECS: 9999999ZZ
CAUSE LACHRYMATION (TEARING EFT). CORNEAL DMG CAN
RTECS: 9999999ZZ
COULD RSLT IN
RTECS: 9999999ZZ
TRACT. HOWEVER, IT IS NOT CONSIDERED COMMON OCCUP
RTECS: 9999999ZZ
DO NOT INDUCE
RTECS: 9999999ZZ
ANYTHING BY MOUTH TO UNCON PERSON. CONSULT MD. NOTE
RTECS: 9999999ZZ
OTHER CHRONIC RESP DISEASES/RECURRENT SKIN
RTECS: 9999999ZZ
PERSON DIAGNOSED AS SENSITIZED TO MDI, NO FURTHER
RTECS: 9999999ZZ
LOOSELY & ALLOW TO STAND 24-48 HRS. WASH DOWN
RTECS: 9999999ZZ
UNION CARBIDE'S TERGITOL TMN-10 (20%) & WATER
RTECS: 9999999ZZ
IN SAFE USE OF PROD. FOLLOW ALL LABEL
RTECS: 9999999ZZ
AIR-PURIFYING RESP EQUIPPED W/ORGANIC
RTECS: 9999999ZZ
TO POOR WARNING PROPERTIES OF MDI, ENSURE PROPER FIT
RTECS: 9999999ZZ
POLYVINYL ALCOHOL).
RTECS: 9999999ZZ
AREA COVERED BY CREAM TO A MINIMUM.
RTECS: 9999999ZZ
ISOCYANIC ACID, METHYLENEDI-P-PHENYLENE ESTER;
CAS: 101-68-8
RTECS: NQ9350000
Fraction By Weight: 15%
OSHA PEL 0.2 MG/M3, C (MFR)
ACGIH TLV: 0.2 MG/M3, C (MFR)
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
IMMED/DELAYED & INCL CHEST TIGHTNESS, RESP
RTECS: 9999999ZZ
& TISS MOISTURE & CAN CAUSE LOCALIZED IRRIT AS WELL
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:IN CONC ABOVE 0.02PPM CAN PRDCE
IRRIT OF MUC MEMB IN RESP TRACT, RUNNING NOSE, SORE THROAT,
PRODUCTIVE COUGH & REDUCTION IN LUNG FUNC. EXPOS TO CONC WELL ABOVE
TLV COULD LEAD TO BRONCH, BRONCH S PASM & PULM EDEMA. THESE EFTS
USUALLY REVERSIBLE. DUE TO LOW VOLAT, HIGH EXPOS ARE NOT ANTIC
EXCEPT IF (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:MATL OVERHEATED/SPRAYED AS AEROSOL
INTO AIR. HYPERSENSITIVITY PNEUM HAS BEEN REPORTED. ANOTHER
RESPONSE IS HYPERACTIVITY/HYPERSENSIT. PERSONS W/PRE-EXISTING
UNSPECIFIC BRONCH HYPERACTIVITY/WI TH SPECIFIC ISOCYANATE
HYPERSENSIT WILLRESPOND TO SM ISOCYANATE CONC @ LEVELS WELL BELOW
TLV. SYMP COULD BE (ING 2)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:FLUSH W/CLEAN, LUKEWARM WATER (LOW PRESS) FOR @ LEAST 15
MIN, OCCAS LIFTING EYELIDS & OBTAIN MED ATTN. SKIN:REMOVE CONTAMD
CLTHG. WASH THORO W/SOAP & WATER. WASH CONTAMD CLTHG THORO BEFORE
REUSE. INHAL:MOVE TO AREA FREE FROM RISK OF FURTHER EXPOS. ADMIN
O*2/ARTF RESP AS NEEDED. OBTAIN MED ATTN. ASTHMATIC-TYPE SYMP MAY
DEVELOP & MAY BE IMMED/DELAYED UP TO SEVERAL HRS. TREATMENT IS (ING
8)
Fire Fighting
Flash Point Method:PMCC
Flash Point:>350F,>177C
Extinguishing Media:DRY CHEM (E.G. MONOAMMONIUM PHOSPHATE, POTASSIUM
SULFATE & POTASSIUM CHLORIDE), CO*2, HIGH EXPANSION (SUPDAT)
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . USE COLD WATER TO COOL FIRE-EXPOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:DURING FIRE, MDI VAP & OTHER IRRIT,
HIGHLY TOX GASES MAY BE GENERATED BY THERMAL DECOMP/COMBUST. AT
TEMP > 400F, POLYMERIC MDI CAN POLYMERIZE & (SUPDAT)
Accidental Release
Spill Release Procedures:COVER SPILL W/SAWDUST, VERMICULITE, FULLER'S
EARTH/OTHER ABSORB MATL. POUR DECONTAM SOLN OVER SPILL AREA & ALLOW
TO REACT FOR @ LEAST 10 MIN. COLLECT MATL IN OPEN CNTNRS & ADD
FURTHER AMTS OF DECONTAM SOLN. REMOVE CNTNRS TO SAFE PLACE, COVER
(ING 12)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN TIGHTLY CLSD CNTNRS TO PVNT
MOISTURE CONTAM. DO NOT RESEAL IF CONTAM SUSPECTED. MIN/MAX STORAGE
TEMP:65F (20C)/86F (30C). SHELF LIFE:6 MOS.
Other Precautions:AVOID CNTCT W/SKIN & EYES. IF CNTNR EXPOS TO HIGH
HEAT, 400F(204C), IT CAN BE PRESSURIZED & POSS RUPTURE. MDI REACTS
SLOWLY W/WATER TO FORM CO*2 GAS. GAS CAN CAUSE SEALED CNTNRS TO
EXPAND & POSS RUPTU RE. EDUCATE & TRAIN EMPLOYEES (ING 14)
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPRVD AIR-SUPPLIED RESP DURING SPRAY
APPLICATN, DURING LONG-TERM (> 1 HR) EXPOS WHEN PROD HEATED/IN
ENVIRON OF HIGH CONC ABOVE TLV OF 0.2PPM. FOR SHORT-TERM (< 1 HR)
EMER SITUATIONS @ CONC NEAR TLV, NIOSH/MSHA APPRVD (ING 15)
Ventilation:LOCAL EXHAUST SHOULD BE USED TO MAINTAIN LEVELS BELOW THE
TLV WHENEVER MDI IS PROCESSED OR HEATED.
Protective Gloves:CHEM RESISTANT (NATRL RUBBER, (ING 17)
Eye Protection:ANSI APPVD CHEM WORK GOGG W/FULL(SUPDAT)
Other Protective Equipment:ANSI APVD SFTY SHWRS & EYE WASH STNS. CVR AS
MUCH OF EXPOS SKIN AS POSS W/APPROP CLTHG. IF SKIN CREAM USED, KEEP
(ING 18
Work Hygienic Practices:CONTACT LENSES SHOULD NOT BE WORN.
Supplemental Safety and Health
SOL IN H*2O:REACTS SLOWLY W/WATER TO LIBERATE CO*2 GAS. EXTING
MEDIA:(PROTEINIC) CHEM FOAM, WATER SPRAY FOR LG FIRES. EXPLO
HAZ:DECOMPOSE WHICH CAN CAUSE PRESS BUILD-UP IN CLSD CNTNRS. EXPLO
RUPTURE I S POSS. THEREFORE, USE COLD WATER TO COOL FIRE-EXPOS
CNTNRS. EYE PROT: LENGTH FACESHIELD .
Chemical Properties
HCC:N1
Spec Gravity:1.13 @ 77F
Solubility in Water:SUPDAT
Appearance and Odor:YELLOW LIQUID; SLIGHTLY MUSTY ODOR.
Percent Volatiles by Volume:NEGLIG
Stability
Stability Indicator/Materials to Avoid:YES
WATER, AMINES, STRONG BASES, ALCOHOLS. WILL CAUSE SOME CORROSION TO
COPPER ALLOYS & ALUMINUM.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:BY HIGH HEAT AND FIRE: CARBON
MONOXIDE, OXIDES OF NITROGEN, TRACES OF HCN, MDI.
Conditions to Avoid Polymerization:CNTCT W/MOISTURE/OTHER MATLS WHICH
REACT W/ISOCYANATES. MAY OCCUR AT TEMP > 400F (204C).
Disposal
Waste Disposal Methods:WASTE MUST BE DISPOSED OF I/A/W FED, STATE &
LOCAL ENVIRONMENTAL CONTROL REGS. INCINERATION IS PREFERRED METHOD.
EMPTY CNTNRS MUST BE HANDLED W/CARE DUE TO PROD RESIDUE. DECONTAM
CNTNRS PRIOR TO DISP. DO NOT HEAT/CUT EMPTY CNTNR W/ELEC/GASTORCH.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.